.webp)
A TRD 1ZZ-FE Supercharger
Shop At Sites Such as MonkeyWrenchRacing(MWR), Wiseco, CP Pistons, or JE Pistons, For Builds!
Hit The 180-210PS Mark! With Mods!
If You Dont Care For Emissions, Get Up to 280-300PS On A Built Modded Motor!
This Is Fitted For Cars For Under 2700LBS!
Do Weight Reduction! 👈
Mod The Transmission and Car!
NA Emissioned Free For Most States!
The Sound Is Amazing!
Get Better And Approved Sticky Tires!
Get 4A-GE Power With Premium Fuel!
Most Powerful Supercharged Potential i4 Motor Up To Date! 2004
Building a performance-oriented yet road-legal Toyota 1ZZ-FE engine with a TRD supercharger presents an exciting opportunity for enthusiasts who want both street compliance and noticeable power gains. The 1ZZ-FE, a 1.8-liter inline-four engine found in cars like the Toyota Corolla, Matrix, and Celica GT, makes around 130 horsepower from the factory. While modest in its stock form, this engine responds well to forced induction. The TRD supercharger kit, designed specifically for the 1ZZ-FE, offers a reliable and emissions-legal way to significantly boost performance.
The TRD supercharger adds approximately 7 to 7.5 psi of boost and is backed by a CARB Executive Order (EO), making it legal for road use in strict emissions regions such as California. It typically includes larger fuel injectors and a TRD ECU reflash, which safely adds around 40 to 45 horsepower at the crank. With the supercharger alone, total output rises to roughly 170–175 horsepower, or about 145–150 horsepower at the wheels. This modification maintains full OBD-II compatibility and does not interfere with emissions equipment, which is critical for remaining road legal.
To enhance power further while staying within legal limits, additional bolt-ons can be added. These include a CARB-approved cold air intake, a high-flow catalytic converter, and a cat-back exhaust system that maintains legal noise and emissions standards. Together, these parts can contribute another 10–15 horsepower at the crank. A mild, emissions-compliant ECU tune can also be used to extract extra performance without disabling emissions-related sensors. Altogether, this configuration can achieve around 190 to 195 horsepower at the crank and about 165 to 170 horsepower at the wheels.
This setup represents the upper limit of what can be achieved with a naturally aspirated 1ZZ-FE using only legal modifications. Any attempt to go beyond this, such as increasing boost levels, removing the catalytic converter, or using methanol injection, would likely render the car illegal for road use in most areas. Therefore, staying within certified parts and software is essential for maintaining street legality while still enjoying substantial performance gains.
In conclusion, a 1ZZ-FE engine equipped with a TRD supercharger, legal bolt-on parts, and a compliant tune offers a well-balanced combination of power and road legality. With careful part selection and tuning, drivers can enjoy up to 195 horsepower while passing emissions tests and avoiding legal issues. This approach is ideal for enthusiasts who use their vehicle daily but still want a noticeable upgrade over stock performance. It’s a practical and rewarding path for anyone interested in extracting more fun from their 1ZZ-powered Toyota without crossing into illegal territory.
Complete Road-Legal TRD Supercharger Kit with Intercooler 1ZZ-FE
TRD Eaton M62 Supercharger
Official TRD unit (e.g., PTR29-00041) for Corolla/Matrix
Supercharger-Specific Intake Manifold
Comes with TRD kit, must be used
Bypass Valve
Helps drivability and emissions compliance
Mounting Brackets + Tensioner
For correct blower fitment and belt tension
Drive Belt
Sized for stock TRD pulley
TRD Piggyback ECU or Fuel Calibration Unit
Retains OBD2; legal in most U.S. states
CARB EO Sticker (if applicable)
Required for California and CARB states
Intercooler Kit
Front-Mount Air-to-Air Intercooler (FMIC)
Universal bar-and-plate, 550x180x65mm
Custom Charge Piping (2.25"–2.5")
Aluminum or steel with bead-rolled ends
Silicone Couplers + T-Bolt Clamps
For sealed, heat-resistant connections
Intercooler Mounting Brackets
Bolt-on or custom fabricated
Bypass Valve Reroute (if needed)
Must maintain vacuum functionality
Closed-System Catch Can (optional)
Must vent back to intake for legality
All intercooler parts must retain: MAF sensor, PCV, EVAP, O2 sensors, and full emissions plumbing.
Fueling
Fuel Injectors (440–550cc)
High-quality (Denso, DeatschWerks)
High-Flow Fuel Pump (Walbro 255LPH / AEM 340LPH)
Plug-and-play
Wideband O2 Sensor + Gauge
For tuning, not emissions-controlled
ECU + Tuning
TRD Piggyback ECU
Legal, pre-tuned for stock TRD kit
or
Aftermarket ECU (tuned to pass readiness)
Risky in emissions regions; not CARB legal
Retain OBD2 Readiness
All monitors must set; no check engine lights
Exhaust + Emissions Compliance
Stock Catalytic Converter
Must be retained
CARB/EPA-Certified High-Flow Cat (if upgraded)
Only legal if certified
2.25–2.5” Cat-Back Exhaust
Legal if it meets local sound limits
Test Pipe / Cat Delete Not road legal
Supporting Mods
Colder Spark Plugs (NGK BKR7E or Iridium)
Prevents knock under boost
Upgraded Radiator (Koyo, Mishimoto)
Optional, keeps temps stable
Boost + AFR Gauges
Safe monitoring, legal
Final Touches!
TRD Supercharger with EO number (PTR29-00041)
Stock or high-quality catalytic converter
Emissions equipment retained (EGR, PCV, EVAP, O2 sensors)
Intercooler that doesn’t interfere with emissions
Functional OBD2 diagnostics, no CEL
Proper fueling, spark, and monitoring for safety
Check with your local laws and regulations before modifying, swiping motors, and transmission..👈
No comments:
Post a Comment